All rights reserved –
Privacy Policy –
Terms of Use
Katradis only uses high-quality filaments from approved providers. We have established high UV-protection standards for raw materials, while the entire production process, from the filament to end titration, is supervised by the quality.
High constant quality levels are documented, and there is total traceability for each filament used.
Katradis nets are among the most stable in the market. Shrinkage is minimum when the nets are properly treated.
This experience allows us to produce nets with high resistance to breakage in comparison with their weight.
Measurement of mesh size: According to the Industry Standard for knot- and ripple-free net (Super Knot), the mesh size is measured between the center of 2 opposed junctions (Fig. 1) in accordance with ISO 1107-1974.
| NET.NR | THREAD DIAM. | MESH SIZE mm 1/2-msk | WIDTH MESH | WEIGHT (kg/m) | WEIGHT gr/pr m2 | SOLIDITY | BREAKING STRENGHT KG | BALE SIZE mtr |
|---|---|---|---|---|---|---|---|---|
| 210/30(10) | 10 | 960 | 2,69 | 286 | 42 | 160 | ||
| 210/30(10) | 12,5 | 960 | 2,5 | 213 | 42 | 180 | ||
| 210/36(12) | 10 | 960 | 3,45 | 367 | 55 | 130 | ||
| 210/36(12) | 13 | 960 | 3,2 | 262 | 55 | 130 | ||
| 210/36(12) | 14 | 960 | 3,1 | 235 | 55 | 140 | ||
| 210/36(12) | 15,5 | 960 | 3,05 | 209 | 55 | 140 | ||
| 210/42(14) | 1,45 | 13 | 960 | 3,8 | 311 | 0,22 | 61 | 110 |
| 210/42(14) | 1,45 | 14 | 960 | 3,75 | 285 | 0,21 | 61 | 110 |
| 210/42(14) | 1,45 | 15,5 | 960 | 3,7 | 254 | 0,19 | 61 | 110 |
| 210/48(16) | 1,51 | 13 | 1008 | 4,75 | 373 | 0,23 | 67 | 95 |
| 210/48(16) | 1,51 | 14 | 1008 | 4,6 | 335 | 0,22 | 67 | 95 |
| 210/48(16) | 1,51 | 15,5 | 1008 | 4,4 | 290 | 0,19 | 67 | 95 |
| 210/48(16) | 1,51 | 18 | 1008 | 4,3 | 244 | 0,17 | 67 | 95 |
| 210/48(16) | 1,51 | 19,5 | 1008 | 4,15 | 277 | 0,15 | 67 | 110 |
| 210/48()16) | 1,51 | 22,5 | 1008 | 4,1 | 186 | 0,13 | 67 | 110 |
| 210/48(16) | 1,51 | 25 | 1008 | 4,05 | 165 | 0,12 | 67 | 110 |
| 210/60(20) | 1,7 | 14 | 1008 | 5,85 | 426 | 0,24 | 89 | 75 |
| 210/60(20) | 1,7 | 15,5 | 1008 | 5,75 | 379 | 0,22 | 89 | 75 |
| 210/60(20) | 1,7 | 16,5 | 1008 | 5,65 | 349 | 0,21 | 89 | 75 |
| 210/60(20) | 1,7 | 18 | 1008 | 5,45 | 309 | 0,19 | 89 | 75 |
| 210/60(20) | 1,7 | 19,5 | 1008 | 5,4 | 289 | 0,17 | 89 | 75 |
| 210/60(20) | 1,7 | 22,5 | 1008 | 5,2 | 236 | 0,75 | 89 | 80 |
| 210/60(20) | 1,7 | 25 | 1008 | 5,05 | 206 | 0,14 | 89 | 80 |
| 210/60(20) | 1,7 | 28,5 | 1008 | 4,95 | 177 | 0,12 | 89 | 80 |
| 210/72(24) | 1,73 | 15,5 | 1008 | 6,4 | 421 | 0,22 | 96 | 70 |
| 210/72(24) | 1,73 | 16,5 | 1008 | 6,3 | 390 | 0,21 | 96 | 70 |
| 210/72(24) | 1,73 | 18 | 1008 | 6,2 | 351 | 0,19 | 96 | 70 |
| 210/72(24) | 1,73 | 19,5 | 1008 | 5,95 | 311 | 0,18 | 96 | 70 |
| 210/72(24) | 1,73 | 22,5 | 1008 | 5,6 | 254 | 0,15 | 96 | 80 |
| 210/72(24) | 1,73 | 25,5 | 1008 | 5,5 | 220 | 0,14 | 96 | 80 |
| 210/72(24) | 1,73 | 28,5 | 1008 | 5,4 | 193 | 0,12 | 96 | 80 |
| 210/96(32) | 1,87 | 18 | 1008 | 7,15 | 405 | 0,21 | 118 | 60 |
| 210/96(32) | 1,87 | 19,5 | 1008 | 6,95 | 364 | 0,19 | 118 | 60 |
| 210/96(32) | 1,87 | 22,5 | 1008 | 6,85 | 311 | 0,17 | 118 | 60 |
| 210/96(32) | 1,87 | 25,5 | 1008 | 6,7 | 268 | 0,15 | 118 | 60 |
| 210/96(32) | 1,87 | 29 | 1008 | 6,35 | 223 | 0,13 | 118 | 60 |
| 210/108(36) | 1,98 | 19,5 | 1008 | 8,65 | 453 | 0,2 | 138 | 50 |
| 210/108(36) | 1,98 | 22,5 | 1008 | 8,25 | 374 | 0,18 | 138 | 50 |
| 210/108(36) | 1,98 | 25,5 | 1008 | 7,95 | 318 | 0,16 | 138 | 55 |
| 210/108(36) | 1,98 | 27 | 1008 | 7,85 | 297 | 0,15 | 138 | 55 |
| 210/108(36) | 1,98 | 29 | 1008 | 7,8 | 274 | 0,14 | 138 | 55 |
| NET.NR | HALF MESH ΜΜ | KNOT LENGTH MESH ΜΜ | ΜΕSH OPENING MM |
|---|---|---|---|
| 210/15(4.5) | 4,5 | 2,3 | 6,7 |
| 210/15 (4.5) | 6 | 2,3 | 9,7 |
| 210/18(6) | 4,5 | 2,6 | 6,4 |
| 210/18(6) | 6 | 9,4 | 9,4 |
| 210/18 (6) | 8 | 2,6 | 13,4 |
| 210/24(8) | 6 | 3,1 | 8,9 |
| 210/24 (8) | 8 | 3,1 | 12,9 |
| 210/24(8) | 10 | 3,1 | 16,9 |
| 210/30 (10) | 10 | 3,4 | 16,6 |
| 210/30 (10) | 12,5 | 3,4 | 21,6 |
| 210/30 (10) | 15,5 | 3,4 | 27,6 |
| 210/36(12) | 10 | 3,7 | 16,3 |
| 210/36 (12) | 13 | 3,7 | 22,3 |
| 210/36 (12) | 15,5 | 3,7 | 27,3 |
| 210/42(14) | 13 | 4,1 | 21,9 |
| 210/42(14) | 14 | 4,1 | 23,9 |
| 210/42(14) | 15,5 | 4,1 | 26,9 |
| 210/42 (14) | 18 | 4,1 | 31,9 |
| 210/48(16) | 13 | 4,5 | 21,5 |
| 210/48(16) | 15,5 | 4,5 | 26,5 |
| 210/48(16) | 18 | 4,5 | 31,5 |
| 210/48(16) | 19,5 | 4,5 | 34,5 |
| 210/48(16) | 22,5 | 4,5 | 40,5 |
| 210/48(16) | 25 | 4,5 | 45,5 |
| 210/60(20) | 15,5 | 5,2 | 25,8 |
| 210/60(20) | 18 | 5,2 | 30,8 |
| 210/60(20) | 19,5 | 5,2 | 33,8 |
| 210/60(20) | 22,5 | 5,2 | 39,8 |
| 210/60(20) | 25 | 5,2 | 44,8 |
| 210/60(20) | 28,5 | 5,2 | 51,8 |
| NET.NR | HALF MESH ΜΜ | KNOT LENGTH MESH ΜΜ | ΜΕSH OPENING MM |
|---|---|---|---|
| 210/72(24) | 16,5 | 5,6 | 27,4 |
| 210/72(24) | 18 | 5,6 | 30,4 |
| 210/72(24) | 19,5 | 5,6 | 33,4 |
| 210/72(24) | 22,5 | 5,6 | 39,4 |
| 210/72(24) | 25 | 5,6 | 44,4 |
| 210/72(24) | 28,5 | 5,6 | 51,4 |
| 210/96(32) | 18 | 5,8 | 30,2 |
| 210/96(32) | 19,5 | 5,8 | 33,2 |
| 210/96(32) | 22,5 | 5,8 | 39,2 |
| 210/96(32) | 25,5 | 5,8 | 45,2 |
| 210/96(32) | 29 | 5,8 | 52,2 |
| 210/108(36) | 22,5 | 6 | 39 |
| 210/108(36) | 25,5 | 6 | 45 |
| 210/108(36) | 27 | 6 | 48 |
| 210/108(36) | 29 | 6 | 52 |
| 210/108(36) | 35 | 6 | 64 |
| 210/120(40) | 25,5 | 7 | 44 |
| 210/120(40) | 27 | 7 | 47 |
| 210/120(40) | 29 | 7 | 51 |
| 210/120(40) | 32 | 7 | 57 |
| 210/138(46) | 25,5 | 7,5 | 43,5 |
| 210/138(46) | 27 | 7,5 | 46,5 |
| 210/138(46) | 29 | 7,5 | 50,5 |
| 210/138(46) | 32 | 7,5 | 56,5 |
| 210/156(52) | 27 | 8 | 46 |
| 210/156(52) | 29 | 8 | 50 |
| 210/156(52) | 32 | 8 | 56 |
| 210/156(52) | 35 | 8 | 62 |
Subscribe to our newsletter