All rights reserved –
Privacy Policy –
Terms of Use
We keep in stock a wide range of sizes and types of alloy shackles (screw pin “D” type and Bow type & bolt, nut & cotter pin safety type shackles “D” and Bow type) and thimbles suitable for all aquaculture applications for connecting & securing cages, chains, rope slings etc.
Alloy shackles are produced with an alloy steel pin and high carbon hot dip galvanized body with a safety factor of 6:1 (Minimum Breaking Load to WLL ratio) and are all proof load tested at 2:1 of their WLL. Alloy shackles are produced according to the latest American Specification RRC-271. All shackles are permanently marked with their size and WLL for easy selection when needed. These shackles are also suitable for lifting purposes. All alloy shackles are accompanied with our test certificates. Caution should be exercised in the connection of the shackles as forces must be perpendicular to the pin for full utilization of the WLL of the shackle. Sideways loading is not recommended as it reduces the WLL.
Our quality assurance department guarantees their excellent quality and makes sure that Katradis provides products of long duration of life in the most competitive prices of the market.
We also supply all type and sizes of thimples.
| Side Loading Reduction Chart For Screw Pin and Bolt Type Shackles | |
|---|---|
| Angle of Side Load from Vertical In-Line of shackle | Adjusted Working Load Limit |
| 0° In-Line * | 100% of Rated Working Load Limit |
| 45° from In-Line * | 70% of Rated Working Load Limit |
| 90° from In-Line * | 50% of Rated Working Load Limit |
* In-Line load is applied perpendicular to pin.
| Nominal Size (in.) D | Weight Each (kg) | Dimensions (mm) | Working Load Limit (tons) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | L | M | P | |||
| 3/16 | 0,03 | 9,65 | 6,35 | 22,4 | 4,85 | 15,2 | 14,2 | 24,9 | 37,3 | 4,06 | 28,4 | 4,85 | 0,33 |
| 1/4 | 0,05 | 11,9 | 7,85 | 28,7 | 6,35 | 19,8 | 15,5 | 32,5 | 46,7 | 4,85 | 35,1 | 6,35 | 0,50 |
| 5/16 | 0,09 | 13,5 | 9,65 | 31,0 | 7,85 | 21,3 | 19,1 | 37,3 | 53,0 | 5,60 | 42,2 | 7,85 | 0,75 |
| 3/8 | 0,14 | 16,8 | 11,2 | 36,6 | 9,65 | 26,2 | 23,1 | 45,2 | 63,0 | 6,35 | 51,5 | 9,65 | 1 |
| 7/16 | 0,17 | 19,1 | 12,7 | 42,9 | 11,2 | 29,5 | 26,9 | 51,5 | 74,0 | 7,85 | 60,5 | 11,2 | 1,5 |
| 1/2 | 0,33 | 20,6 | 16,0 | 47,8 | 12,7 | 33,3 | 30,2 | 58,5 | 83,5 | 9,65 | 68,5 | 12,7 | 2,0 |
| 5/8 | 0,62 | 26,9 | 19,1 | 60,5 | 16,0 | 42,9 | 38,1 | 74,5 | 106 | 11,2 | 85,0 | 17,5 | 3,25 |
| 3/4 | 1,07 | 31,8 | 22,4 | 71,5 | 19,1 | 51,0 | 46,0 | 89,0 | 126 | 12,7 | 101 | 20,6 | 4,75 |
| 7/8 | 1,64 | 36,6 | 25,4 | 84,0 | 22,4 | 58,0 | 53,0 | 102 | 148 | 12,7 | 114 | 24,6 | 6,5 |
| 1 | 2,28 | 42,9 | 28,7 | 95,5 | 25,4 | 68,5 | 60,5 | 119 | 167 | 14,2 | 129 | 26,9 | 8,5 |
| 1-1/8 | 3,36 | 46,0 | 31,8 | 108 | 29,5 | 74,0 | 68,5 | 131 | 190 | 16,0 | 142 | 31,8 | 9,5 |
| 1-1/4 | 4,31 | 51,5 | 35,1 | 119 | 32,8 | 82,5 | 76,0 | 146 | 210 | 17,5 | 156 | 35,1 | 12 |
| 1-3/8 | 6,14 | 57,0 | 38,1 | 133 | 36,1 | 92,0 | 84,0 | 162 | 233 | 19,1 | 174 | 38,1 | 13,5 |
| 1-1/2 | 7,80 | 60,5 | 41,4 | 146 | 39,1 | 98,5 | 92,0 | 175 | 254 | 20,6 | 187 | 41,1 | 17 |
| 1-3/4 | 12,6 | 73,0 | 51,0 | 178 | 46,7 | 127 | 106 | 225 | 313 | 25,4 | 231 | 57,0 | 25 |
| 2 | 20,4 | 82,5 | 57,0 | 197 | 53,0 | 146 | 122 | 253 | 348 | 31,0 | 263 | 61,0 | 35 |
| 2-1/2 | 38,9 | 105 | 70,0 | 267 | 69,0 | 184 | 145 | 327 | 453 | 35,1 | 330 | 79,5 | 55 |
| Nominal Size (in.) D | Weight Each (kg) | Dimensions (mm) | Working Load Limit (tons) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | K | L | M | |||
| 1/4 | 0,05 | 11,9 | 7,85 | 6,35 | 6,35 | 24,6 | 15,5 | 22,4 | 40,4 | 4,85 | 35,1 | 0,50 |
| 5/16 | 0,08 | 13,5 | 9,65 | 7,85 | 7,85 | 29,5 | 19,1 | 26,2 | 48,5 | 5,60 | 42,2 | 0,75 |
| 3/8 | 0,13 | 16,8 | 11,2 | 9,65 | 9,65 | 35,8 | 23,1 | 31,8 | 58,5 | 6,35 | 51,5 | 1 |
| 7/16 | 0,20 | 19,1 | 12,7 | 11,2 | 11,2 | 41,4 | 26,9 | 36,6 | 67,5 | 7,85 | 60,5 | 1,5 |
| 1/2 | 0,27 | 20,6 | 16,0 | 12,7 | 12,7 | 46,0 | 30,2 | 41,4 | 77,0 | 9,65 | 68,5 | 2,0 |
| 5/8 | 0,57 | 26,9 | 19,1 | 15,7 | 16,0 | 58,5 | 38,1 | 51,0 | 95,5 | 11,2 | 85,0 | 3,25 |
| 3/4 | 1,20 | 31,8 | 22,4 | 20,6 | 19,1 | 70,0 | 46,0 | 60,5 | 115 | 12,7 | 101 | 4,75 |
| 7/8 | 1,43 | 36,6 | 25,4 | 24,6 | 22,4 | 81,0 | 53,0 | 71,5 | 135 | 12,7 | 114 | 6,5 |
| 1 | 2,15 | 42,9 | 28,7 | 25,4 | 25,4 | 93,5 | 60,5 | 81,0 | 151 | 14,2 | 129 | 8,5 |
| 1-1/8 | 3,06 | 46,0 | 31,8 | 31,8 | 28,7 | 103 | 68,5 | 91,0 | 172 | 16,0 | 142 | 9,5 |
| 1-1/4 | 4,11 | 51,5 | 35,1 | 35,1 | 31,8 | 115 | 76,0 | 100 | 191 | 17,5 | 156 | 12 |
| 1-3/8 | 5,28 | 57,0 | 38,1 | 38,1 | 35,1 | 127 | 84,0 | 111 | 210 | 19,1 | 174 | 13,5 |
| 1-1/2 | 7,23 | 60,5 | 41,4 | 41,1 | 38,1 | 137 | 92,0 | 122 | 230 | 20,6 | 187 | 17 |
| 1-3/4 | 12,1 | 73,0 | 51,0 | 54,0 | 44,5 | 162 | 106 | 146 | 279 | 25,4 | 231 | 25 |
| 2 | 19,2 | 82,5 | 57,0 | 60,0 | 51,0 | 184 | 122 | 172 | 312 | 31,0 | 263 | 35 |
| 2-1/2 | 32,5 | 105 | 70,0 | 66,5 | 66,5 | 238 | 145 | 203 | 377 | 35,1 | 330 | 55 |
| Nominal Size (in.) D | Weight Each (kg) | Dimensions (mm) | Working Load Limit (tons) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | H | L | N | |||
| 3/16 | 0,03 | 9,65 | 6,35 | 22,4 | 4,85 | 15,2 | 14,2 | 37,3 | 24,9 | 4,85 | 0,33 |
| 1/4 | 0,05 | 11,9 | 7,85 | 28,7 | 6,35 | 19,8 | 15,5 | 46,7 | 32,5 | 6,35 | 0,50 |
| 5/16 | 0,10 | 13,5 | 9,65 | 31,0 | 7,85 | 21,3 | 19,1 | 53,0 | 37,3 | 7,85 | 0,75 |
| 3/8 | 0,15 | 16,8 | 11,2 | 36,6 | 9,65 | 26,2 | 23,1 | 63,0 | 45,2 | 9,65 | 1 |
| 7/16 | 0,22 | 19,1 | 12,7 | 42,9 | 11,2 | 29,5 | 26,9 | 74,0 | 51,5 | 11,2 | 1,5 |
| 1/2 | 0,36 | 20,6 | 16,0 | 47,8 | 12,7 | 33,3 | 30,2 | 83,5 | 58,5 | 12,7 | 2,0 |
| 5/8 | 0,62 | 26,9 | 19,1 | 60,5 | 16,0 | 42,9 | 38,1 | 106 | 74,5 | 17,5 | 3,25 |
| 3/4 | 1,23 | 31,8 | 22,4 | 71,5 | 19,1 | 51,0 | 46,0 | 126 | 89,0 | 20,6 | 4,75 |
| 7/8 | 1,79 | 36,6 | 25,4 | 84,0 | 22,4 | 58,0 | 53,0 | 148 | 102 | 24,6 | 6,5 |
| 1 | 2,28 | 42,9 | 28,7 | 95,5 | 25,4 | 68,5 | 60,5 | 167 | 119 | 26,9 | 8,5 |
| 1-1/8 | 3,75 | 46,0 | 31,8 | 108 | 28,7 | 74,0 | 68,5 | 190 | 131 | 31,8 | 9,5 |
| 1-1/4 | 5,31 | 51,5 | 35,1 | 119 | 31,8 | 82,5 | 76,0 | 210 | 146 | 35,1 | 12 |
| 1-3/8 | 7,18 | 57,0 | 38,1 | 133 | 35,1 | 92,0 | 84,0 | 233 | 162 | 38,1 | 13,5 |
| 1-1/2 | 9,43 | 60,5 | 41,4 | 146 | 38,1 | 98,5 | 92,0 | 254 | 175 | 41,1 | 17 |
| 1-3/4 | 15,4 | 73,0 | 51,0 | 178 | 44,5 | 127 | 106 | 313 | 225 | 57,0 | 25 |
| 2 | 23,7 | 82,5 | 57,0 | 197 | 51,0 | 146 | 122 | 348 | 253 | 61,0 | 35 |
| 2-1/2 | 44,6 | 105 | 70,0 | 267 | 66,5 | 184 | 145 | 453 | 327 | 79,5 | 55 |
| 3 | 70 | 127 | 82,5 | 330 | 76,0 | 200 | 165 | 546 | 365 | 92,0 | 85 |
| 3-1/2 | 120 | 133 | 95,5 | 372 | 92,0 | 229 | 203 | 626 | 419 | 105 | 120 |
| 4 | 153 | 140 | 108 | 368 | 104 | 254 | 229 | 653 | 468 | 116 | 150 |
| Nominal Size (in.) D | Weight Each (kg) | Dimensions (mm) | Working Load Limit (tons) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | D | F | G | K | M | P | R | |||
| 1/4 | 0,06 | 11,9 | 7,85 | 6,35 | 15,5 | 19,1 | 40,4 | 24,6 | 39,6 | 6,35 | 0,50 |
| 5/16 | 0,10 | 13,5 | 9,65 | 7,85 | 19,1 | 25,4 | 48,5 | 29,5 | 46,2 | 7,85 | 0,75 |
| 3/8 | 0,15 | 16,8 | 11,2 | 9,65 | 23,1 | 31,0 | 58,5 | 35,8 | 55,0 | 9,65 | 1 |
| 7/16 | 0,22 | 19,1 | 12,7 | 11,2 | 26,9 | 36,1 | 67,5 | 41,1 | 63,5 | 11,2 | 1,5 |
| 1/2 | 0,34 | 20,6 | 16,0 | 12,7 | 30,2 | 41,4 | 77,0 | 46,0 | 71,0 | 12,7 | 2,0 |
| 5/8 | 0,67 | 26,9 | 19,1 | 16,0 | 38,1 | 51,0 | 95,5 | 58,5 | 89,5 | 16,0 | 3,25 |
| 3/4 | 1,14 | 31,8 | 22,4 | 19,1 | 46,0 | 60,5 | 115 | 70,0 | 103 | 20,6 | 4,75 |
| 7/8 | 1,74 | 36,6 | 25,4 | 22,4 | 53,0 | 71,5 | 135 | 81,0 | 120 | 24,6 | 6,5 |
| 1 | 2,52 | 42,9 | 28,7 | 25,4 | 60,5 | 81,0 | 151 | 93,5 | 135 | 25,4 | 8,5 |
| 1-1/8 | 3,45 | 46,0 | 31,8 | 28,7 | 68,5 | 91,0 | 172 | 103 | 150 | 31,8 | 9,5 |
| 1-1/4 | 4,90 | 51,5 | 35,1 | 31,8 | 76,0 | 100 | 191 | 115 | 165 | 35,1 | 12 |
| 1-3/8 | 6,24 | 57,0 | 38,1 | 35,1 | 84,0 | 111 | 210 | 127 | 183 | 38,1 | 13,5 |
| 1-1/2 | 8,39 | 60,5 | 41,4 | 38,1 | 92,0 | 122 | 230 | 137 | 196 | 41,1 | 17 |
| 1-3/4 | 14,2 | 73,0 | 51,0 | 44,5 | 106 | 146 | 279 | 162 | 230 | 54,0 | 25 |
| 2 | 21,2 | 82,5 | 57,0 | 51,0 | 122 | 172 | 312 | 184 | 264 | 60,0 | 35 |
| 2-1/2 | 38,6 | 105 | 70,0 | 66,5 | 145 | 203 | 377 | 238 | 344 | 66,5 | 55 |
| 3 | 56 | 127 | 82,5 | 76,0 | 165 | 216 | 429 | 279 | 419 | 89,0 | 85 |
| SWL | D | d | a | c | b | Weight per 100 pce |
|---|---|---|---|---|---|---|
| kg | mm | mm | mm | mm | mm | kg |
| 80 | 5 | 5 | 10 | 19 | 11 | 1,9 |
| 100 | 6 | 6 | 13 | 25 | 14 | 3,4 |
| 200 | 8 | 8 | 16 | 32 | 18 | 7 |
| 320 | 10 | 10 | 19 | 38 | 20 | 13 |
| 520 | 12 | 12 | 25 | 51 | 26 | 24 |
| 800 | 16 | 16 | 32 | 64 | 33 | 50 |
| 1100 | 20 | 20 | 38 | 76 | 40 | 80 |
| 1500 | 22 | 22 | 44 | 89 | 50 | 130 |
| 2100 | 25 | 25 | 51 | 100 | 57 | 200 |
| 3000 | 28 | 28 | 57 | 115 | 68 | 300 |
| 3500 | 32 | 32 | 64 | 127 | 73 | 430 |
| 5000 | 38 | 38 | 76 | 152 | 85 | 675 |
| 7000 | 45 | 45 | 90 | 180 | 96 | 1250 |
| 8000 | 50 | 50 | 102 | 200 | 108 | 1750 |
| SWL | D | d | a | c | r | d | Approx 100 pce/WT |
|---|---|---|---|---|---|---|---|
| kg | mm | mm | mm | mm | mm | mm | kg |
| 80 | 5 | 5 | 10 | 19 | 8 | 11 | 1,9 |
| 100 | 6 | 6 | 13 | 25 | 10 | 14 | 3,4 |
| 200 | 8 | 8 | 16 | 32 | 12 | 18 | 7 |
| 320 | 10 | 10 | 19 | 38 | 16 | 20 | 13 |
| 520 | 12 | 12 | 25 | 51 | 19 | 26 | 26 |
| 800 | 16 | 16 | 32 | 64 | 28 | 33 | 50 |
| 1100 | 20 | 20 | 38 | 76 | 33 | 40 | 80 |
| 1500 | 22 | 22 | 44 | 89 | 37 | 50 | 130 |
| 2100 | 25 | 25 | 51 | 100 | 40 | 57 | 200 |
| 3000 | 28 | 28 | 57 | 115 | 47 | 68 | 310 |
| 3500 | 32 | 32 | 64 | 127 | 52 | 73 | 430 |
| 5000 | 38 | 38 | 76 | 152 | 63 | 85 | 700 |
| 7000 | 45 | 45 | 90 | 180 | 75 | 96 | 1250 |
| 8000 | 50 | 50 | 102 | 200 | 78 | 108 | 1750 |
Subscribe to our newsletter